TP80C User Manual
4.2 Power Connection
1) Make sure the printer power is turn off.
2) Connect power adapter to printer
3) Connect power adapter to power cord.
4) Plug the other side of power cord into the socket outlet.
Notes
：
► Please only use the power adapter recommended by supplied or equivalent products.
►
When disconnecting the power adapter plug, handheld plug connector housing, to avoid
the pulling on the cable in force.
► Avoid dragging the power adapter cable, otherwise it will damage the cables and cause
fire and shock.
► Avoid putting power adapter around a heating device, otherwise the cable may melt,
causing fire and shock.
►
If you do not use the printer for a long time, disconnect the power supply of printer power
To Next Page
Loading...
Need help?
General
