HTC 80 iD - Default Chapter; Table of Contents

HTC 80 iD Table of contents
i
1 Introduction 1
1.1 General Information ......................................................... 1
1.2 Responsibility .................................................................. 1
1.3 Manual ............................................................................. 1
1.3.1 Safety instructions – Explanation of symbols ..... 1
1.4 Transportation ................................................................. 2
1.5 On delivery ...................................................................... 2
1.6 Unpacking ....................................................................... 3
1.7 Machine name plate ........................................................ 3
1.8 Handling and storage ...................................................... 4
1.9 Noise ............................................................................... 4
2 Safety 5
2.1 General Information ......................................................... 5
2.2 Warnings ......................................................................... 5
2.3 Notes ............................................................................... 6
3 Machine description 7
3.1 General Information ......................................................... 7
3.2 Pre-separator .................................................................. 7
3.3 Dust extractor .................................................................. 8
3.4 The front of the dust extractor ......................................... 8
3.5 Lifting the machine .......................................................... 11
3.6 Wheel brake .................................................................... 12
3.7 Description of controls - Keypad ..................................... 12
4 Usage 14
4.1 General Information ......................................................... 14
4.2 The positions for the dust extractor ................................. 14
4.2.1 The dust extractor's operating position ............... 15
4.2.2 Lower the dust extractor to the service position . 15
4.3 The positions for the pre-separator ................................. 16
4.4 Connection of hoses to the dust extractor ....................... 19
4.5 Installing extra ventilation hose ....................................... 20
4.6 Starting and stopping the dust extractor .......................... 20
4.7 Disengaging the pre-separator using the bypass valve .. 21
4.8 Manual cleaning of the filter using the slide gate ............ 22
4.9 Handling Longopac ......................................................... 24
4.9.1 Removing full Longopac ..................................... 25
4.9.2 Fitting Longopac ................................................. 26