Basics 7
Inserting the battery
Insert the battery (with its exposed copper contacts first) into the
battery compartment. Then gently push the battery into place.
Charging the battery
The battery is partially charged when shipped. Before you turn on
and start using your phone, it is recommended that you charge
the battery. Some batteries perform best after several full charge/
discharge cycles.
Only the power adapter and USB sync cable provided with your phone
must be used to charge the battery.
Do not remove the battery from the phone while you are charging it using
the power or car adapter.
1. From the adapters that are included in your device package,
select and insert the appropriate adapter to the AC charger.
You can check the wall socket to know which adapter to use.
2. Connect one end of the USB cable to the AC charger.
To Next Page
Loading...
