Internet connections 85
Save the certificate file to the root folder of the storage card.
Press HOME > MENU , and then tap Settings.
Tap Security > Install from SD card.
Select the network certificate needed to connect to the EAP-TLS
network.
Follow the steps in the previous section to connect to the Wi-Fi
network.
Checking the wireless network status
Press HOME > MENU , and then tap Settings.
Tap Wireless & networks.
On the Wireless & networks screen, tap Wi-Fi settings, and then
tap the wireless network that the phone is currently connected
to.
A message box is then displayed showing the Wi-Fi network name,
status, speed, signal strength, and more.
If you want to remove the wireless network settings on your phone, tap
Forget. You’ll need to enter the settings again if you want to connect to this
wireless network.
Connecting to another Wi-Fi network
Press HOME > MENU , and then tap Settings.
Tap Wireless & networks > Wi-Fi settings. Detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
To manually scan for available Wi-Fi networks, on the Wi-Fi
settings screen, press MENU
and then tap Scan.
Tap another Wi-Fi network to connect to it.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
To Next Page
Loading...
