84 Internet connections
to turn Wi-Fi on. The phone then scans for available wireless
networks.
Tap Wi-Fi settings. The network names and security settings of
detected Wi-Fi networks are displayed in the Wi-Fi networks
section.
If the wireless network you want to connect to is not in the list
of detected networks, scroll down the screen, and then tap Add
Wi-Fi network. Enter the wireless network settings, and then tap
Save.
Tap the Wi-Fi network you want to connect to.
If you selected an open network, you’ll be automatically
connected to the network.
If you selected a network that is secured with WEP, enter the
key and then tap Connect.
Depending on the network type and its security settings, you may also need
to enter more information or choose a security certificate.
When your phone is connected to a wireless network, the Wi-Fi icon
appears in the status bar and tells you the approximate signal
strength (number of bands that light up).
The next time your phone connects to a previously accessed secured
wireless network, you won’t be asked to enter the key or other
security information again, unless you reset your phone to its factory
default settings.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to your
phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
3.
4.
5.
•
•
To Next Page
Loading...
