HTC DURATIQ Information about the machine
14 www.htc-floorsystems.com
D004753, 01.01
3.2.1 Transport
Always make sure that the machine is securely anchored to its surroundings and that the
grinding head is lowered on to the surface. Tighten the securing straps, or other equipment
used for anchoring during transport over non-moving parts, e.g. the machine's chassis.
3.2.2 Lifting
The machine can be lifted using the lifting eyes provided and a lifting strap. The weights
should be in position 2 and the handle in position 4, see Handling weights page 31 and
Handle setting page 28.
3.3 Storage
The machine should be stored in a heated, dry area when not in use. It may be damaged by
condensation and cold.
To Next Page
Loading...
