HTC DURATIQ Operation
D004753, 01.01
www.htc-floorsystems.com 31
5.3 Handling weights
No. Weights in the different positions
1 Weight position 1
2 Weight position 2
In order for the grinding pressure to be maximised, the weights shall be placed in position 1
and to be minimised in position 2, see page 31 and Technical Data.
The machine can be equipped with two
weights, making it easy to move the centre
of gravity of the machine.
It is also possible to remove the weights by
removing the locking pin with a simple
manual manoeuvre.
WARNING
Risk of crushing.
Risk for personal injury.
To Next Page
Loading...
