HTC DURATIQ Operation
28 www.htc-floorsystems.com
D004753, 01.01
5 Operation
5.1 General
The following section describes how to change tools and how to operate the grinding
machine. This section does not deal with the technical aspects of grinding, such as selection
of grinding tools, etc.
For choice of tool, go to HTC's website www.htc-floorsystems.com for more information.
5.2 Handle setting
WARNING
Risk of crushing.
Risk for personal injury.
NOTE
Ensure that the handle lock locks properly in the position
wanted when adjusting the handle.
To Next Page
Loading...
