120 2F. Voice Services
# Open <Application Name> to open an application in
your device. (See “Opening Applications With ASR”
on page 120.)
Making a Voice Call With ASR
1. Press and then tap > Voice Dialer.
2. Wait until you hear a tone and the word
“Listening...” appears on the screen.
3. Say “Call [contact name]” to call a person stored in
your contacts list.
– or –
Say “Dial [contact number]” to dial a spoken
phone number.
4. Tap OK to confirm or Cancel to cancel the
command; or choose from a menu if ASR is not
sure what you would like to do.
Opening Applications With ASR
You can jump directly to many applications by saying
“Open” followed by the application name.
1. Press and then tap > Voice Dialer.
2. Wait until you hear a tone and the word
“Listening...” appears on the screen.
3. Say “Open [application name]” to open an
application in your device.
4. Tap OK to confirm or Cancel to cancel the
command; or choose from a menu if ASR is not
sure what you would like to do.
Tip: Use ASR in a quiet environment so it can accurately
recognize your commands.
Note: Regardless of which command you use, you will be
asked to confirm your choice, or choose from a menu
if ASR is not sure what you would like to do.
Note: When dialing a phone number, numbers can be three
digits (for example, 911), seven digits (for example,
555-1234), or ten digits (for example, 222-555-1234).
To Next Page
Loading...
