150 2I. Bluetooth
The pairing and connection status is displayed below
the hands-free headset or car kit name in the Bluetooth
devices section. When the Bluetooth headset or car kit
is connected to your device, the Bluetooth connected
icon is displayed in the status bar. Depending on
the type of headset or car kit you have connected, you
can then start using the headset or car kit to listen to
music and to make and or receive phone calls.
Reconnecting a Headset or Car Kit
When you have paired a headset with your device, you
should be able to reconnect it automatically by turning
on Bluetooth on your device and then turning on the
headset. However, might have to connect manually if
your headset has been used with another Bluetooth
device.
1. Press > , and then tap Settings >
Wireless & networks > Bluetooth settings.
2. If the Bluetooth check box is not selected, select it
to turn Bluetooth on.
3. Make sure that the headset is discoverable.
4. Tap the headset’s name in the Bluetooth devices
section.
5. If prompted to enter a passcode, try 0000 or 1234,
or consult the headset or car kit documentation to
find the passcode.
If you still cannot reconnect to the headset or car kit,
follow the instructions in “Disconnecting or Unpairing
From a Bluetooth Device” in this section, and then
follow the steps in “Connecting a Bluetooth Headset or
Car Kit.”
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
To Next Page
Loading...
Need help?
General
