The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
dot1x max-user user-number
The maximum number of concurrent access users is set on the interface.
By default, each interface allows a maximum number of 128 concurrent access users.
----End
5.3.9 (Optional) Enabling 802.1x Authentication Triggered by
DHCP Messages
After 802.1x authentication triggered by DHCP messages is enabled, the AR1200-S
authenticates users when they send DHCP messages to apply for IP addresses.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dot1x dhcp-trigger
802.1x authentication triggered by DHCP messages is enabled.
By default, 802.1x authentication triggered by DHCP messages is disabled.
----End
5.3.10 (Optional) Setting Values of Timers Used in 802.1x
Authentication
On the AR1200-S, you can set the client authentication timeout timers, handshake interval
between the AR1200-S and the 802.1x client, quiet timer value, re-authentication interval, and
interval for sending authentication requests.
Context
Before setting the value of a timer used in 802.1x authentication, ensure that the timer function
is enabled.
It is recommended that you retain default settings of the timers.
Procedure
Step 1 Run:
system-view
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 5 NAC Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
106