Huawei AR1200-S User Manual

No. Data
2 Priority of the zone
3 Interfaces that you want to add to the zone
3.3.2 Creating a Zone
Before configuring a firewall, you need to create the related zones. Then you can deploy security
services according to the security priorities of the zones.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
firewall zone zone-name
A zone is created.
The AR1200-S can be configured with up to 255 zones, and no default zone is provided.
Step 3 Run:
priority security-priority
The priority of the zone is set.
You must configure a priority for a zone before making other configurations. The priority cannot
be changed. The priorities of the zones cannot be the same. A greater value indicates a higher
priority.
----End
3.3.3 Adding an Interface to the Zone
You can add interfaces to the specified zone.
Prerequisites
The zone has been created through the firewall zone command.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 3 Firewall Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
51

Huawei AR1200-S Specifications

General

Brand	Huawei
Model	AR1200-S
Category	Network Router
Language	English