Huawei AR1200-S - Configuring a Domain

By default, the time for the primary HWTACACS server to return to the active state is 5 minutes.
Step 16 (Optional) Run:
quit
Return to the user view.
Step 17 (Optional) Run:
hwtacacs-server accounting-stop-packet resend { disable | enable number }
Retransmission of accounting-stop packets is configured.
You can enable retransmission of accounting-stop packets and set the retransmission count, or
disable the function. By default, the retransmission function is enabled and the retransmission
count is 100.
Step 18 (Optional) Run:
return
Return to the user view.
Step 19 (Optional) Run:
hwtacacs-user change-password hwtacacs-server template-name
The password saved on the HWTACACS server is changed.
----End
1.5.4 Configuring a Domain
The created authentication scheme, authorization scheme, accounting scheme, and
HWTACACS server template take effect only after being applied to a domain.
Context
Before configuring a domain, ensure that the authentication scheme, authorization scheme,
accounting scheme, and HWTACACS server template have been created.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain domain-name
A domain is created and the domain view is displayed.
The AR1200-S has two default domains: default and default_admin. The default domain is
used by common access users and the default_admin domain is used by administrators.
Step 4 Run:
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 1 AAA Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25