Huawei AR1200-S - Enabling Traffic Statistics and Monitoring; Setting the Session Thresholds

3.11.2 Enabling Traffic Statistics and Monitoring
You can enable traffic statistics and monitoring at the system level, zone level, or IP address
level as needed.
Procedure
l Enabling system-level traffic statistics and monitoring
1. Run:
system-view
The system view is displayed.
2. Run:
firewall statistics system enable
The system-level traffic statistics and monitoring is enabled.
By default, the system-level traffic statistics and monitoring is disabled.
l Enabling zone-level traffic statistics and monitoring
1. Run:
system-view
The system view is displayed.
2. Run:
firewall zone zone-name
The zone view is displayed.
3. Run:
statistics zone enable { inzone | outzone }
The zone-level traffic statistics and monitoring is enabled.
By default, the zone-level traffic statistics and monitoring is disabled.
l Enabling IP address-level traffic statistics and monitoring
1. Run:
system-view
The system view is displayed.
2. Run:
firewall zone zone-name
The zone view is displayed.
3. Run:
statistics ip enable { inzone | outzone }
The IP address-level traffic statistics and monitoring is enabled.
By default, the IP address-level traffic statistics and monitoring is disabled.
----End
3.11.3 Setting the Session Thresholds
You can set the session thresholds for the system-level, zone-level, or IP address-level traffic
statistics and monitoring as needed.
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 3 Firewall Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74