Table 1-1 Data plan
Item Data
WLAN service WEP open system authentication and no encryption
Service set
l Name: huawei-1
l SSID: huawei-1
l WLAN virtual interface: WLAN-BSS 1
User VLAN VLAN 100
DHCP server AR1200
IP address pool on VLANIF100: 192.168.0.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure basic AR1200 attributes, including the country code and DHCP server address,
so that the AR1200 can allocate IP addresses to users.
2. Configure a WLAN-BSS interface and bind it to a service set so that radio packets can be
sent to the WLAN service module after reaching the AR1200.
3. Configure a radio profile on the AR1200 and bind it to a radio interface to enable STAs to
communicate with the AR1200.
4. Configure a service set on the AR1200 and bind the specified security profile and traffic
profile to it to ensure security and QoS for STAs.
5. Configure a VAP and deliver VAP parameters so that STAs can access the WLAN.
Procedure
Step 1 Configure basic AR1200 attributes.
# Configure the country code for the AR1200.
<Huawei> system-view
[Huawei] wlan global country-code cn
# Configure a VLANIF interface, assign an IP address to it for Layer 3 packet forwarding, and
enable the DHCP server function on it. In this example, an IP address pool is configured on
VLANIF 100 to assign IP addresses to STAs.
[Huawei] dhcp enable
[Huawei] vlan 100
[Huawei-vlan100] quit
[Huawei] interface vlanif100
[Huawei-Vlanif100] ip address 192.168.0.1 24
[Huawei-Vlanif100] dhcp select interface
[Huawei-Vlanif100] quit
Step 2 Configure a WLAN-BSS interface.
[Huawei] interface wlan-bss 1
[Huawei-Wlan-Bss1] port hybrid tagged vlan 100
[Huawei-Wlan-Bss1] quit
Step 3 Configure a radio for the AR1200.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
To Next Page
Loading...
