EasyManua.ls Logo

Huawei AR1200 Series - Page 29

Huawei AR1200 Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# Create a WMM profile wmm-1 and use the default settings.
[Huawei] wlan
[Huawei-wlan-view] wmm-profile name wmm-1 id 1
[Huawei-wlan-wmm-prof-wmm-1] quit
# Create a radio profile radio-1 and bind the WMM profile wmm-1 to it.
[Huawei-wlan-view] radio-profile name radio-1
[Huawei-wlan-radio-prof-radio-1] wmm-profile name wmm-1
[Huawei-wlan-radio-prof-radio-1] quit
# Bind the radio profile radio-1 to a radio interface.
[Huawei] interface wlan-radio 0/0/0
[Huawei-Wlan-Radio0/0/0] radio-profile name radio-1
[Huawei-Wlan-Radio0/0/0] quit
Step 4 Configure a service set.
# Create a security profile.
Create a security profile security-1, and set the authentication mode to WEP open system
authentication and the encryption mode to no encryption.
[Huawei] wlan
[Huawei-wlan-view] security-profile name security-1 id 1
[Huawei-wlan-sec-prof-security-1] wep authentication-method open-system
[Huawei-wlan-sec-prof-security-1] security-policy wep
[Huawei-wlan-sec-prof-security-1] quit
# Configure a traffic profile to specify the QoS policy.
Create a traffic profile traffic-1 and use the default settings.
[Huawei-wlan-view] traffic-profile name traffic-1
[Huawei-wlan-traffic-prof-traffic-1] quit
# Create a service set and bind the traffic profile, security profile, and WLAN-BSS interface to
the service set.
[Huawei-wlan-view] service-set name huawei-1
[Huawei-wlan-service-set-huawei-1] ssid huawei-1
[Huawei-wlan-service-set-huawei-1] traffic-profile name traffic-1
[Huawei-wlan-service-set-huawei-1] security-profile name security-1
[Huawei-wlan-service-set-huawei-1] wlan-bss 1
[Huawei-wlan-service-set-huawei-1] quit
Step 5 Configure a VAP.
# Bind the service set huawei-1 to a radio interface.
[Huawei] interface wlan-radio 0/0/0
[Huawei-Wlan-Radio0/0/0] service-set name huawei-1
[Huawei-Wlan-Radio0/0/0] quit
Step 6 Verify the configuration.
The WLAN with the SSID huawei-1 is available for STAs connected to the AP, and these STAs
can connect to the WLAN without authentication.
----End
Configuration Files
#
sysname
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22

Other manuals for Huawei AR1200 Series

Related product manuals