Huawei AR1200 Series - Page 10

Figure 2-2 SAE550 panel
1 42 3 5
a
b
c
d
e
Indicators on the Panel
Table 2-2 lists the indicators on the SAE220 or SAE550 panel.
Table 2-2 Indicators on the SAE220 or SAE550 panel
Number
in Figure
2-1 and
Figure 2-2
Indicator Color Description
1 STAT Green If the indicator is steady green, the
operating system is starting.
Orange If the indicator is steady orange, the
BIOS runs normally.
Red If the indicator is steady red, a fault
that affects services has occurred and
cannot be rectified automatically. The
fault needs manual rectification.
Off If the indicator is off, the board is
powered off or is being reset.
2 HDD0 Green If the indicator is blinking, the system
is accessing the flash memory.
If the indicator is off, the system does
not start or access the flash memory.
3 HDD1 Green If the indicator is blinking, the system
is accessing the hard disk.
If the indicator is off, the system does
not start or access the hard disk.
4 and 5 GE interface
indicators:
Green If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 2 SAE Description
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4