Huawei AR1200 Series - Page 11

Number
in Figure
2-1 and
Figure 2-2
Indicator Color Description
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Yellow
If the indicator is blinking, the
interface is transmitting or receiving
data.
If the indicator is off, no data is being
transmitted or received.
Interfaces
Table 2-3 lists the interfaces on the SAE220 or SAE550.
Table 2-3 Interfaces on the SAE220 or SAE550
Lette
r in
Figu
re
2-1
and
Figu
re 2-2
Name Qu
ant
ity
Description Cable Type
a Power
on/off
button
1 Used to power on or off the operating system.
l Hold down the button to forcibly power
off the operating system.
l Press the button to power on or off the
operating system.
NOTE
Press the power button to shut down the operating
system before powering off or remove the SAE
board.
-
b Console
interface
1 Used to connect to the console to implement
on-site system configuration.
Console Cable
c USB
port
2 Used to connect to a mouse, keyboard, flash
memory, or USB drive.
USB2.0,
compatible with
USB1.0 and
USB1.1
d VGA
interface
1 Used to connect to a computer monitor. VGA cables
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 2 SAE Description
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5