Numbe
r
Indicator Color Description
7 GPS Green Steady on: The GPS function is enabled.
Off: The GPS function is disabled.
8 WLAN1
(working at
the 2.4 GHz
frequency
band)
Green Blinking: Data is being transmitted on the
WLAN link.
Off: The WLAN link is shut down.
9 WLAN2
(working at
the 5.0 GHz
frequency
band)
Green Blinking: Data is being transmitted on the
WLAN link.
Off: The WLAN link is shut down.
10 and
11
GE electrical
interface
indicators:
l 10: ACT
indicator
l 11: LINK
indicator
Yellow ACT indicator blinking: Data is being
transmitted or received.
ACT indicator off: No data is being transmitted
or received.
Green LINK indicator steady on: A link has been
established.
LINK indicator off: No link is established.
Interface Description
Console Interface
The console interface of a router can connect to an operation terminal for onsite configuration.
Table 3-250 lists attributes of the console interface.
Table 3-250 Console interface attributes
Attribute
Description
Connector type Micro USB, B socket
Standards compliance USB 2.0
Working mode Full-duplex Universal Asynchronous Receiver/
Transmitter (UART)
Cable type Micro USB data cable
3G/LTE Antenna Interface
3G/LTE antenna interfaces of a router include a primary antenna interface and a diversity
antenna interface. The primary antenna interface receives and transmits 3G/LTE signals, and
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 364
To Next Page
Loading...
