the diversity antenna interface helps improve quality of received 3G/LTE signals. Table 3-251
lists attributes of a 3G/LTE antenna interface.
Table 3-251 3G/LTE antenna interface attributes
Attribute Description
Connector type SMA-K (screw threads outside and a hole inside)
Standards compliance and
frequency bands supported
l FDD LTE: bands 1/2/3/5/7/8/20
l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8
l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz)
Rate
l Frequency Division Duplexing (FDD) LTE: uplink
rate of 50 Mbit/s and downlink rate of 100 Mbit/s
l Dual Carrier High Speed Packet Access Plus (DC-
HSPA+): uplink rate of 5.76 Mbit/s and downlink rate
of 42 Mbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate
of 5.76 Mbit/s and downlink rate of 21.6 Mbit/s
Cable type
l LTE primary antenna interface: primary LTE
remote antenna
l LTE diversity antenna interface: GPS+LTE remote
diversity antenna
GPS Antenna Interface
A GPS antenna interface can connect to a GPS+LTE remote diversity antenna to provide the
GPS positioning function. Table 3-252 lists attributes of a GPS antenna interface.
Table 3-252 GPS antenna interface attributes
Attribute
Description
Connector type SMA-K (screw threads outside and a hole
inside)
Frequency bands supported 1575 MHz
Cable type GPS+LTE remote diversity antenna
GE Electrical Interface
A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet
services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-253 lists GE electrical interface
attributes.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 365