Huawei Ascend Maintenance Manual

Y210 Mobile Phone
Maintenance Manual
9 Principles and Failure Analysis
Issue 1.0 (2012-11-28)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40
Troubleshooting Display Failure
Figure 9-12 Display failure
LCD fails to display
Return the phone
to the factory
Clean the LCD 50-pin male
& female connectors. Snap
them in place again. Is the
problem solved?
End
Y
N
Re-install the phone's
firmware. Is the problem
solved?
End
Y
N
Replace the LCD. Is the
problem solved?
End
Y
N
9.4.2 Camera
The Y210 uses a 3.0-megapixel full-frame camera.
The 3.0-megapixel full-frame camera uses a 24-pin board to board (BTB) connector and is
controlled by the I2C bus. The data is transmitted in MIPI mode.

Huawei Ascend Specifications

General

Brand	Huawei
Model	Ascend
Category	Cell Phone
Language	English