Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
display the MAC addresses of the hotspots that have been found.
(Note: This test requires an active hotspot in the testing
environment.)
Press the volume down button to start the next test.
11.2 Voice Call Test
To test the voice call function, perform the following steps:
Step 1 Install a UIM card and battery on the phone.
Step 2 Press the power button to power the phone on.
Step 3 Check whether the signal strength displayed on the LCD is normal (given that the network is
normal).
Step 4 Make a call to a fixed-line phone, and check the voice quality during the call.
If no problems are found, finish the voice call test. If any problems are found, troubleshoot
the phone or send it to an advanced service site for repair.
----End
To Previous Page
Loading...
Need help?
General
