HUAWEI BTS3012 Fast Installation Guide Internal Use
3
Appearance
and
configuration
BTS3012 Cabinet Layout Principle
Layout principle
Multiple BTS3012 cabinets can be installed in combined mode.
Reserve a passage with a width of least 0.8m in front of the cabinet.
Keep the cabinet close to the sealing window of feeder cables to reduce the length
of feeder cables.
In all installation conditions, use a horizontal ruler to measure the levelness of
cabinets and ensure that the cabinet to be installed is on a horizontal surface with
other cabinets in the equipment room.
Notes:
Do not install a cabinet close to the wall.
When installing a cabinet along the wall, reserve a gap of at least 10cm.
Cabinet Installation — Install a BTS3012 cabinet on the cement ground with enough bearing capacity
To Next Page
Loading...
