Huawei DPU40D-N06A3 - Optional) LIVE-C APP; Installing the LIVE-C APP; Logging in to the LIVE-C APP

DPU40D-N06A3, DBU20B-N12A3, and
DBU50B-N12A1 Distributed Power System
User Manual
4 (Optional) LIVE-C APP
Issue 04 (2020-02-29)
Copyright © Huawei Technologies Co., Ltd.
27
4 (Optional) LIVE-C APP
4.1 Installing the LIVE-C APP
Prerequisites

There is a mobile phone running Android 4.3 or later.

The mobile phone can properly connect to the Internet.

The PSU needs to support the mobile app function and the connection mode is Bluetooth
connection or WiFi connection.
Procedure
Step 1 Obtain the latest LIVE-C APP installation package from Huawei technical support.
Step 2 Install the LIVE-C APP on the mobile phone.
Figure 4-1 LIVE-C APP icon
----End
4.2 Logging In to the LIVE-C APP
Prerequisites

You have obtained the LIVE-C APP user name and password.

The mobile phone should be within 10 m away from the power equipment.

The mobile phone app may be occasionally disconnected due to difference in phone
model and Bluetooth signal strength. Please try again 5 minutes later.