Need help?Do you have a question about the Huawei E5172 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| Ethernet LAN (RJ-45) ports | 1 |
| DHCP client | - |
| Security algorithms | WEP, WPA, WPA2 |
| 4G standard | LTE |
| 2G standards | EDGE, GPRS, GSM |
| 3G standards | HSDPA, HSPA+, HSUPA |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 173 mm |
| Height | 124 mm |
| Weight | 500 g |
Steady blue: powered on/high battery. Alternating blue/pink: low battery. Steady pink: malfunctioning.
On: WLAN enabled. Blinking: data transmission. Off: WLAN disabled.
On: WPS enabled. Blinking: verification in progress. Off: WPS disabled.
Press and hold for 2+ seconds to restore factory settings.
Install the USIM card and the battery according to the illustration.
Connect device cables. Ensure computer IP is in same network segment as device.
Open browser, enter http://192.168.1.1, and log in with default credentials.
Details maximum downlink and uplink speeds for various technologies (LTE, UMTS, GSM).
To Next Page
