Huawei eA380-123 - 5.3.2 Upgrade Management

eA380 Series LTE CPE
User Guide
5 Update Introduction
Issue 01 (2017-08-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47

The firmware version files for CPEs have been created on eSight.

You have been assigned the operation rights.
Procedure:
Step 1 Choose Resources > eLTE Device > Device Software Management > CPE upgrade
management from the main menu.
Step 2 Click to create a task.
a. Set Task Name in Task Set.
b. Set Scheduled Task.
 If you set Scheduled Task to ON, set Scheduled Time manually.
 If you set Scheduled Task to OFF, eSight performs the upgrade task immediately.
c. Set Same Version Upgrade.
 If you set to OFF, eSight will not perform the upgrade task when the target version is
the same as the current version of the LTE CPE.
 If you set to ON, eSight performs the upgrade task when the target version is the same
as the current version of the LTE CPE.
Step 3 Select devices.
d. Click and select a managed object on the page that is displayed.
e. Click OK.
Device models and version are automatically displayed in the Select File area.
Step 4 Set Target Version/File in the list under the Select File.
Step 5 Click OK.
----end