Huawei EC325 - 6 The EC325 Manager GUI Description; Accessing the EC325 Manager GUI

HUA WEI
11
6 The EC325 Manager GUI
Description
Accessing the EC325 Manager GUI
1. To start the program, double-click the shortcut icon of the EC325 Manager on the
desktop.
2. If you are prompted to enter the Personal Identification Number (PIN) code, enter the
correct one and click OK.
You can try three times to enter your PIN code. If you failed to do that after three times,
your UIM card would be locked. If this happens, use the PIN Unblocking Key (PUK)
code to unlock it.
You can try 10 times to enter your PUK code. If you failed to do that after 10 times,
your UIM card cannot be used. If this happens, contact your network operator.
3. When you failed to enter the PIN code or the PUK code, you can click Cancel to skip
over the authentication of the PIN code. Then, the functions related to the UIM card
such as connecting to the Internet, making and answering calls, sending and receiving
text messages, and reading the messages recorded in the UIM card are not available for
you. However, you can still make emergency calls.
The PIN code and the PUK code are provided by your operator. For information about
how to modify and enable/disable your PIN code, refer to "PIN Code Management."
Exiting the EC325 Manager
Select File > Exit and you can perform the following operations:
y Select Quit application to exit the EC325 Manager.
y Select Shut down device to exit the EC325 Manager and stop the data modem. If you
want to re-access the network service, plug and insert the device again.