Huawei EC5805 - Enabling;Disabling the Wi-Fi Function

17
When the EC5805 is in the deep sleep
state, you can press any k
ey to activate
Disabling the Wi-Fi
WPS indicator is off, the Wi-Fi is
t g a WPS Connection
ed to the
en,
the EC5805. If the EC5805 is activated,
the indicators become lightened.
Enabling/
Function
Press and hold Wi-Fi/WPS button until
Wi-Fi/WPS indicator is continuously on in
green, the Wi-Fi is enabled.
Note: Press and hold Wi-Fi/WPS button
until Wi-Fi/
disabled.
Es ablishin
If the Wi-Fi Clients connected to the EC5805
support the WPS function, the EC5805 can
generate a network key without manual
ut. To establish a W
inp PS connection ,do as
follows:
1. Power on the EC5805.
2. Start the Clients connect
EC5805.
3. Enable the WPS function of the EC5805.
Note: Press and hold Wi-Fi/WPS button
until Wi-Fi/WPS indicator is blinking in gre
the WPS is enabled.