Huawei Technologies Proprietary
15
Figure 3-6 DHCP
Select the encapsulation mode and enter the VPI and VCI values.
If you enable Default Route, the DHCP server will dynamically
specify a route for the data from the LAN side. By default, Default
Route is enabled.
If you select Disabled, only the data whose route is included in
the IP routing table will be sent out through the WAN interface. Other
data will be discarded.
After the configuration, click Apply to save the settings, or click
Clear to clear the settings.
III. Static IP
The static IP configuration page is shown in Figure 3-7.
To Next Page
Loading...
