Huawei Technologies Proprietary
50
For RIP 2 Received, if you select Enabled, HG520 can
receive packets that use the RIP 2 protocol.
For RIP 2 Send, if you select Enabled, HG520 can send
packets that use the RIP 2 protocol.
For Send MultiCast, if you select Enabled, HG520 can
send multicast packets.
After configuration, click Apply to save the settings.
3.4 Tools Configuration
3.4.1 System Password
Click System Password of Tools in the navigation bar to display
the password setting page.
The administrator has read/write ability on the web page and can
modify the configurations. You can change the default password for
security concern.
Figure 3-40 System password
To Next Page
Loading...
