Huawei Technologies Proprietary
49
Figure 3-38 RIP configuration
RIP can be enabled on any existing WAN or LAN interface.
You can click
to modify the specified RIP configuration.
Figure 3-39 RIP configuration
Description of the RIP configuration page is as follows:
Interface Name displays the interface on which you want to
share routing table information with other routing devices.
For RIP 1 Received, if you select Enabled, HG520 can
receive packets that use the RIP 1 protocol.
For RIP 1 Send, if you select Enabled, HG520 can send
packets that use the RIP 1 protocol.
To Next Page
Loading...
