Huawei Technologies Proprietary
25
Figure 3-15 Wireless configuration
You need to make the following configurations in this page:
For WLAN Function, you can select Enabled to enable the
WLAN function of HG520.
Enter the SSID (Service Set Identifier) for wireless
connection. SSID identifies the members of a service set. To
connect with HG520 in the wireless mode, all the wireless
devices in your LAN must use the same SSID as specified in
this page.
Select a channel used for your wireless LAN from the
Channel drop-down list. Remember that all wireless devices
communicating with HG520 must use the same channel as
specified in this page.
To Next Page
Loading...
