EasyManua.ls Logo

Huawei FusionServer Pro 2288H V5 - Memory Installation Guidelines

Huawei FusionServer Pro 2288H V5
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A quad-rank LRDIMM generates the same electrical load as a single-rank RDIMM on a
memory bus.
Table 5-7 DDR4 memory
specications
Parameter Specications
Maximum capacity per DDR4 memory module (GB) 128
Rated speed (MT/s) 2933
Operating voltage (V) 1.2
Maximum number of DDR4 memory modules in a
server
a
24
Maximum DDR4 memory capacity of the server
(GB)
b
3072
Maximum operating
speed (MT/s)
1DPC
c
2933
d
2DPC 2666
a: The maximum number of DDR4 memory modules is based on dual-
processor conguration. The value is halved for a server with only one
processor.
b: The maximum DDR4 memory capacity varies depending on the processor
type. The value listed in this table is based on the assumption that memory
modules are fully
congured.
c: DPC (DIMM per channel) indicates the number of DIMMs per channel.
d: If the Cascade Lake processor is used, the maximum operating speed of a
memory module can reach 2933 MT/s. If the Skylake processor is used, the
maximum operating speed of a memory module can reach 2666 MT/s only.
5.4.4 Memory Installation Guidelines
Observe the following when conguring DDR4 memory modules:
Install memory modules only when corresponding processors are
installed.
Do not install LRDIMMs and RDIMMs in the same server.
Install ller memory modules in vacant slots.
Observe the following when conguring DDR4 memory modules in specic
operating mode:
Memory sparing mode
Comply with the general installation guidelines.
Each memory channel must have a valid online spare conguration.
Huawei FusionServer Pro 2288H V5 Server
Technical White Paper 5 Hardware Description
Issue 12 (2020-04-20) Copyright © Huawei Technologies Co., Ltd. 29

Other manuals for Huawei FusionServer Pro 2288H V5

Related product manuals