Huawei FusionServer Pro 2288H V5 - Psus

PCIe
Slot
CPU PCIe
Stand
ards
Conne
ctor
Width
Bus
Width
Port
No.
Root
Port
(B/D/
F)
Device
(B/D/
F)
Slot
Size
Slot 8 CPU 2 PCIe
3.0
x8 ● Sin
gle-
slot
PR
M:
N/A
● 2-
slot
PR
M:
x8
Port3C D7/02/
0
DB/
00/0
HHHL
● The B/D/F (Bus/Device/Function Number) values are the default values when
the server is fully congured with PCIe devices. The values may vary if the
server is not fully congured with PCIe devices or if a PCIe card with a PCI
bridge is congured.
● Root Port (B/D/F) indicates the B/D/F of an internal PCIe root port of the
processor.
● Device (B/D/F) indicates the B/D/F (displayed on the OS) of an onboard or
extended PCIe device.
● The PCIe x16 slots are backward compatible with PCIe x8, PCIe x4, and PCIe
x1 cards. The PCIe cards are not forward compatible. That is, the PCIe slot
width cannot be smaller than the PCIe card link width.
● The full-height half-length (FHHL) PCIe slots are backward compatible with
half-height half-length (HHHL) PCIe cards.
● All slots support PCIe cards of up to 75 W. The power of a PCIe card varies
depending on its model.
● The SP520, SP521, and SP522 do not support driveless server
conguration.
PXE boot is recommended for driveless servers.
5.8 PSUs
● The server supports one or two PSUs.
● The server supports AC or DC PSUs.
● The PSUs are hot-swappable.
● The server supports two PSUs in 1+1 redundancy.
● The same model of PSUs must be used in a server.
● The PSUs are protected against short circuit. Double-pole fuse is provided for
the PSUs with dual input live wires.
● Contact your local Huawei sales representative or use the Intelligent
Computing Compatibility Checker to determine the components to be used.
Huawei FusionServer Pro 2288H V5 Server
Technical White Paper 5 Hardware Description
Issue 12 (2020-04-20) Copyright © Huawei Technologies Co., Ltd. 54