Do you have a question about the Huawei RH2488 V2 Server BMC and is the answer not in the manual?
Model | RH2488 V2 |
---|---|
Remote Management | Yes |
Supported Protocols | IPMI 2.0, SNMP, Redfish |
Power Management | Yes |
RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
Form Factor | 2U rack server |
Security | Trusted Platform Module (TPM) |
BMC Type | Integrated BMC |
Management Interface | WebUI, CLI |
Firmware Update | Yes |
Chipset | Intel C600 Series |
CPU | Intel Xeon E5-2600 v2 series |
Memory | Up to 1.5 TB |
Storage | Up to 8 x 2.5-inch SAS/SATA HDDs or SSDs |
Network | 2 x GE ports, optional 10GE ports |
Power Supply | Redundant power supplies |
Monitoring | Temperature, voltage, fan speed |
Alerts | Email, SNMP traps |
Compatibility | Windows Server, Linux |
Explains the guide's objective to configure IPMI settings.
Lists the target audience for this document.
Defines symbols used in the document for hazards and tips.
Describes the WPCM450 BMC controller and its features.
Presents a typical system setup diagram for the WPCM450 controller.
Explains the Intelligent Platform Management Interface (IPMI) and its capabilities.
Details steps to configure system BIOS settings for IPMI.
Guides on accessing BMC/IPMI settings via Internet Explorer.
Covers monitoring system health via sensor readings and event logs.
Covers various network and system settings configurations.
Allows remote operations like launching console, SOL, and power control.
Covers device maintenance tasks like firmware updates and resets.
Addresses common questions about IPMI firmware flashing and IP/MAC setup.
Introduces AMI Flash Tools for firmware upgrades via different channels.
Details flashing BMC firmware using YAFUKCS in a DOS environment.
Guides on flashing BMC firmware using YAFUFlash in Windows via USB or network.
Explains flashing BMC firmware using YAFUFlash in Linux via network or USB.
Provides steps for firmware recovery using Yafukcs if flashing is interrupted.