Huawei RH2488 V2 Server BMC - 3 Frequently Asked Questions; 3.1 Frequently Asked Questions

3 Frequently Asked Questions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
37
3
Frequently Asked Questions
3.1 Frequently Asked Questions
A. Questions: How do I flash the IPMI firmware?
Answer:
Step 1 Log in the IPMICFG utility by entering the system IP address.
Step 2 Click the Maintenance button. Browse the files to select a correct file to flash the firmware.
Step 3 Click the Update Firmware button to proceed with firmware flashing.
B. Questions: How do I set up the IP address and MAC address for remote access?
Answer:
Step 1 Boot the system into DOS.
Step 2 Run the utility- IPMICFG from DOS.
Step 3 Follow the prompts to set up the IP address and MAC address for remote access.
You can also go to the BIOS to con figure the IP address.
----End
NOTE
User Guide
Issue 04 (2014-09-15)
RH2488 V2 BMC