Need help?Do you have a question about the Huawei iManager NetEco 6000 and is the answer not in the manual?
Covers declaration of non-liability, overview of safety symbols, and local safety regulations.
Details precautions related to high voltage, high electrical leakage, power cables, and electrostatic discharge.
Outlines safety precautions for operating batteries, including handling, short circuits, harmful gas, and temperature.
Provides precautions for moving sharp and heavy objects, drilling holes, and fan safety.
Provides step-by-step instructions for installing a server, including guide rails and power cables.
Covers the installation of various sensors like NTC Temperature, Hydrogen Detection, Smoke, Infrared, and Water sensors.
Details the installation procedures for VCN500 devices and IPC cameras.
Covers the installation of access controllers, magnetic locks, card readers, and emergency door release buttons.
Details switch port descriptions and connecting monitoring cables to NetEco, cameras, and smart cooling products.
Explains how to connect monitoring cables for UPS2000-G, UPS5000G-A, UPS5000-E, and UPS5000-S.
Provides a checklist for verifying the proper installation and placement of cabinets.
Details checks for power and ground cable connections, including material, continuity, and secure crimping.
Details routine maintenance procedures for collectors, VCN, smoke detectors, hydrogen detection systems, and infrared sensors.
Covers procedures for replacing ECC500 collectors, expansion cards, ECC800 main control modules, and independent deployment AI/DI units.
Offers solutions for WebUI login issues, including Internet Explorer settings and trusted sites configuration.
Guides on logging into the ECC800 WebUI, including PC IP configuration and Internet Explorer settings.
Details the process of changing the NetEco server IP address and updating it on connected devices.
To Next Page
General