iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
About This Document
Purpose
This document describes the iManager NetEco V600R008C00 in terms of its hardware
installation, cable connection, commissioning, and maintenance to help readers better
understand the NetEco products.
For details about southbound devices connected to the NetEco that are not described in this
document, see iManager NetEco V600R007C90 Device Installation and Commissioning
Guide.
For details about NetEco product software commissioning, see iManager NetEco 6000
V600R008C00 Product Documentation.
The figures provided in this document are for reference only.
The corresponding software version is NetEco V600R008C00SPC310.
Intended Audience
This document is intended for:
Sales engineers
Technical support personnel
System engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
To Next Page
Loading...
Need help?
General