2 Configuring the IPMI Settings
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
19
1. Network: This item allows you to view or modify network settings.
2. MAC Address: Enter the MAC address for your network.
−
Check the first radio button to obtain an IP address automatically by using DHCP
(Dynamic Host Configuration Protocol).
−
Check the second radio button to use the IP address entered below.
3. IP address: If the second radio button above is checked, enter your IP address in the
box.
4. Subnet Mask: Enter the address for the subnet mask of your network.
5. Default Gateway: Enter the IP address for the default gateway of your network.
6. Primary DNS Server: Enter the IP address of your primary domain name server.
7. Secondary DNS Server: Enter the IP address of your secondary domain name server.
8. Enable VLAN: Check this box to enable Virtual LAN support.
9. VLAN Tag: This item allows you to use VLAN Tagging or Frame Tagging to
encapsulate specific data, so it can be transparently transmitted through multiple
platforms without leaking any information. After configuring network settings, click
Save to save the configuration.
2.4.8 Configuration - Remote Session
This feature allows the user to configure remote session settings. When clicking Remote
Session in the Options window, the following screen displays.
User Guide
Issue 04 (2014-09-15)
RH2488 V2 BMC
To Next Page
Loading...
