EasyManua.ls Logo

Huawei FusionServer RH2288H V3 - Page 23

Huawei FusionServer RH2288H V3
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+Broadwell+SLES11 SP4 For B1)
3 Configuring RAID Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
Figure 3-10 VD Mgmt page
Step 6 Create VD1:in the main administration page press the "F2" key to enter the selection menu, as
show Figure 3-11, select "Creat Virtual Drive" item;
Figure 3-11 Create virtual Drive
Step 7 When you select Create virtual Drive item, enter VD1 the RAID configuration parameters
page,this example, there are 18 disks configured as RAID50; "PD per Span "parameter should
be set to "9"; select the 18 disks, select "Advanced" for set advanced configuration parameters,
as show in Figure 3-12;

Related product manuals