EasyManua.ls Logo

Huawei FusionServer RH2288H V3 - Page 26

Huawei FusionServer RH2288H V3
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+Broadwell+SLES11 SP4 For B1)
3 Configuring RAID Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
Figure 3-16 configuration result
Step 12 Set the Boot device :Press Ctrl-N to Ctrl Mgmt Page Set VD0 as the Boot device;
as shown in Figure 3-17,Then, select "Apply" press "Enter";
Figure 3-17 Set boot device
Step 13 Create CacheCade:in the main administration page press the "F2" key to enter the selection
menu, as show Figure 3-18, select "Create CacheCade Virtual Drive" item;

Related product manuals