1
1 Product Overview
Ports and Buttons
No. Item Description
1 WPS Starts Wi-Fi protected setup (WPS) negotiation.
2 WLAN Enables or disables the WLAN function.
3 On/Off Powers the HG253s V2 on or off.
4 Power Connects to a power adapter.
5 Reset Restores the HG253s V2 to its default settings after you press
and hold this button for 6 seconds or more while the HG253s
V2 is powered on.
A reset will result in all custom data and settings being lost. Use
with caution.
6 Phone2, Phone1 Connects to a telephone.
7
LAN4～LAN1
Connects to Ethernet devices, such as computers, set-top
boxes (STBs), and switches.
8 WAN Connects to an Ethernet device that provides Internet access,
such as a modem or switch.
9 USB Connects to a USB device.
If you connect a USB device to the HG253s V2, verify that the
input voltage and current of the USB device do not exceed 5
V/0.5 A. Otherwise, the HG253s V2 may malfunction.
To Next Page
Loading...
Need help?
General
