6
3. Double-click Internet Protocol Version 4 (TCP/IPv4).
4. Select Obtain an IP address automatically and Obtain DNS server address
automatically. Click OK.
On Windows XP
1. Click in the lower right corner of your desktop.
2. In the displayed dialog box, click Properties.
3. Double-click Internet Protocol (TCP/IP).
4. Select Obtain an IP address automatically and Obtain DNS server address
automatically. Click OK.
Logging In to the Web Management Page
The HG253s V2 provides an intuitive web management page where you can view or set the
HG253s V2 parameters.
1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.
2. Enter the login user name (user by default) and password (user by default). Click Login.
Setting Network Access Parameters
Configuring a Dial-Up Connection to Access the Internet
The HG253s V2 works in PPPoE mode by default. Your network service provider will assign an
account for you automatically. You do not need to configure any dial-up parameter on the
HG253s V2.
Configuring a Wireless Account
If you need to configure the wireless account, you can quickly configure through the web
management page.
For security reasons or to make the password easy to remember, you can change the wireless
network name and password as follows:
1. Log in to the web management page.
2. In the navigation tree, choose Device > Wireless Settings.
3. In SSID, enter your desired WLAN name.
4. In Wireless password, enter your desired key.
5. Click Apply.
To Next Page
Loading...
Need help?
General
