To Next Page

To Previous Page

After you power on the HG532t, the Power indicator turns on, indicates that the

HG532t is working properly.

To power off the HG532t, press the On/Off button on the side panel,

and then unplug the power adapter.

2 Setting Network Access Parameters

2.1 Logging In to the Web-based Configuration

Utility

Most of the HG532t parameters are preset before delivery to meet common

home application scenarios. To check the HG532t's working status or configure

certain advanced network functions, use the web-based configuration utility.

To log in to the web-based configuration utility:

Step 1

Set up network access for your computer. Set the network connection

of your computer to obtain an IP address automatically.

Step 2

Open a web browser on your computer and ensure that the browser

does not use any proxy servers.

Using Internet Explorer 8.0 as an example to ensure no proxy servers

are used:

1. Choose Tools > Internet Options.

2. On the Connections tab of the Internet Options dialog box, click

LAN Settings.

3. In the Proxy server area, ensure that Use a proxy server for your

LAN is cleared. If Use a proxy server for your LAN is selected, clear

Use a proxy server for your LAN, and then click OK.

Step 3

Enter

http://192.168.1.1

in the address bar, and then press

Enter

By default, the Dynamic Host Configuration Protocol (DHCP)

function is enabled. The HG532t then assigns an IP address to your

computer automatically. If you disable the DHCP function, please

ensure that the IP address of the computer and that of the HG532t

LAN port are in the same network segment to enable the computer to

access the web-based configuration utility.

Huawei HG532t User Manual

Other manuals for Huawei HG532t