9
4 Using the USB Port
4.1 Going Online Using a USB Modem
By default, the HSPA uplink service is enabled. When the HG532t is working in
USB modem mode, connect the USB modem to the HG532t so that your device
can access the Internet through the HSPA uplink service.
−
If your USB modem does not need to verify the PIN for Internet access, you
do not need to configure the HG532t through the web-based configuration
utility or perform any dial-up operations on your computer. The HG532t sets
up a dial-up connection after the startup automatically.
−
If your USB modem needs to verify the PIN for Internet access, you need to
create an HSPA uplink connection.
To verify a PIN:
Step 1
Log in to the HG532t's web-based configuration utility.
Step 2
Choose
Basic
>
WLAN
.
Step 3
Click the
PIN
tab.
Step 4
Verify the PIN of your SIM card.
1. Insert a SIM card that needs to verify the PIN into the USB modem,
and insert the USB modem into the USB port.
Wait about 20 seconds. The HG532t needs time to obtain the SIM
card information.
2. Select Verify from the PIN operation drop-down combo box.
3. Enter the PIN that was provided by your SIM card operator in the
PIN text box.
4. Click Submit.
When you do not need to go online, remove the USB modem.
Otherwise, your operator may continue to charge you for data
services.
To Next Page
Loading...
Need help?
General
