Intelligent Tracking
Smart Functions
When intelligent tracking is enabled, voice tracking or
Auto-Framing can be implemented during a meeting.
Choose Settings > Camera in the lower right corner
of the home screen. When the camera is turned on,
you can enable Intelligent Tracking. Then select
Voice Tracking or Auto-Framing to enable the
selected function.
Method
Note
Voice Tracking:
• When a participant speaks, the camera
automatically takes a close-up of the speaker. If
no one speaks, the focal length of the camera is
automatically adjusted based on the number and
locations of participants to display the panoramic
view of all participants at a site.
• Voice tracking supports two-person
conversations. When two persons speak in turn
(such as A-B-A mode), the large screen will
trigger a conversation mode.
Split-screen display: When two persons are
far away from each other, the large screen
displays the close-up images of the two
persons in two panes.
Combined display: When two persons are
close to each other, their close-up images
are combined to display on the large screen.
Auto-Framing:
With this function, the camera automatically adjusts
its focal length based on the number of participants
and their locations to display the panoramic view of
all participants at a site.
Voice tracking
(conversation mode
supported)
Auto-Framing
Conversation mode:
split-screen display
Conversation mode:
combined display
To Next Page
Loading...
