Acoustic Baffle
When the acoustic baffle function is enabled
during a meeting, noise outside the invisible
sound wall at the local site can be effectively
reduced to prevent impact on remote sites.
In the lower right corner of the home screen,
choose Settings > Smart Functions >
Acoustic Baffle and enable the function. After
this function is enabled, you can adjust the
sound pickup range for the acoustic baffle.
The sound pickup distance is 6-meter.
The following figure shows the sound pickup
range.
Method
Note
The acoustic baffle is not supported in the
following situations:
• An external microphone or HDMI camera has
been connected to the large screen.
• Dual audio channels have been enabled for
the current meeting.
• AUDIO IN echo cancellation has been
enabled on the web interface.
Smart Functions
To Next Page
Loading...
