After wireless projection is enabled on your phone, open the app you wish to project in full-
screen mode, go to > to project the app to the large-screen device, and minimize
the app, which will appear as a oating ball o to the side on the phone screen.
• Apps in split-screen or oating-window mode can't be projected.
• To safeguard your privacy, this feature can't be used once your device screen has been
locked.
Touch the projected app in the oating ball to display the app's oating window, and use this
window to control the app.
You can exit app projection in any of the following ways:
• Go to > Project screen to return to wireless projection.
• In Control Panel, touch to expand the shortcut switch panel (depending on your
device model), and touch Wireless Projection to exit wireless projection.
• Swipe down from the upper left edge of your phone to display the notication panel and
touch DISCONNECT to exit wireless projection.
Display & Brightness
Use Eye Comfort Mode
Eye comfort mode can
eectively reduce harmful blue light and adjust the screen to display
warmer colors, relieving eye fatigue and protecting your eyesight.
Enable or Disable Eye Comfort Mode
• Swipe down from the upper right edge of the screen to display Control Panel and touch
to expand the shortcut switches panel. Enable or disable Eye Comfort. Touch and hold
Eye Comfort to access the settings screen.
• Go to Settings > Display & brightness > Eye Comfort and enable or disable Enable all
day.
Once Eye Comfort mode is enabled,
will be displayed in the status bar, and the screen
will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Scheduled, then set Start and
End according to your preferences.
Settings
106
To Next Page
Loading...
