Huawei Mate50 Pro - Biometrics & Password

• Go to Settings > Notications & status bar, locate and touch the app for which you want
to disable notications, then disable Allow notications.
• Go to Settings > Notications & status bar > Manage all, and turn o the switch next to
the app.
Hide Content of Notications on the Lock Screen
To enable this feature:
Go to Settings > Notications & status bar, and enable Hide notication content.
Notications Turn on Screen
Go to Settings > Notications & status bar, and enable Wake screen. Your phone will then
automatically turn on the lock screen when it receives a notication.
Manage Notications for Specic Apps
Go to Settings > Notications & status bar, touch an app to go to the notication
management details screen, and enable or disable notications for the app. You can then set
the notication mode within the app, or separate modes for dierent types of notications,
by touching the corresponding notication type (for example, Social), as follows:
The notication types may vary by app.
• Gentle notications: When this switch is turned on, notications will only display in
Notication Panel, and will not appear as banners, lock screen notications, or status bar
icons, nor will your device ring or vibrate.
• Lock screen and Banners: Allows you to select the notication display method.
• Notication tone: Allows you to change the notication tone and set a vibration pattern.
• Allow interruptions: When you enable Allow interruptions for an app, your phone will
still be able to receive
notications from this app in Do Not Disturb mode.
You can also swipe down from the upper left edge of the screen to display Notication Panel,
swipe left on a notication, and go to > More settings to manage the app's
notications.
Set the Status Bar to Simple Display
Go to Settings > Notications & status bar > Status bar, and enable Simple display. After
doing so, only the following frequently-used icons will display on the phone status bar by
default: time, Wi-Fi network, mobile signal, and battery level.
Biometrics & Password
Settings
109