Huawei MU609 - Send the USSD Command in Non-Transparent Mode; Reference Process

HUAWEI MU609 HSPA LGA Module
Application Guide
USSD Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113
15.2 Send the USSD Command in non-Transparent Mode
15.2.1 Reference Process
Command
Description
AT^USSDMODE=0
Set as non-Transparent mode
OK
AT+CSCS="IRA"
Set the TE supported character set
as "IRA"
OK
AT+CUSD=1,"*133*950#",15
Send the USSD code to network.
OK
+CUSD:
1,"0031002E80A17968537365F6884C60
C5000A0032002E80A18BC4000A003300
2E90FD5E02751F6D3B000A0034002E5F
697968000A0035002E751F6D3B5B9D51
78000A0036002E65F65C1A751F6D3B00
0A0037002E5A314E504F1195F2000A00
38002E516C51714FE1606F000A0039002
E592753434E16754C000A002A002E900
051FA000A0000",72
The network sends the menu
information to the TE.
AT+CUSD=2
End the USSD session
OK
AT+CSCS="UCS2"
OK
AT+CUSD=1,"00310032",15
Send the USSD code to network,
encoded as UCS2.
OK
+CUSD: 2
The network does not support.
Note:
"*133*950#" is just available in China Mobile network in Shen Zhen area. The USSD code is
various in different network.